Winmax Bd77 Flash File

1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port…
Set MTK USB Port (COM7)
Please Hold “ON” to connect with the phone…
Connected to Phone.
CPU: MT6261_S0001 Ver: CB01 md:8000
Downloading Boot7 …
Nor/SF Flash Type: NOR_NEW_0113
Nor Flash Code: 00EF0070(00160000)
Nor/SF Flash Size: 0x400000 Hex Bytes
INT/EXT RAM Size: 0x0+0x0
Reading(Nor)…
The phone information:
KEYTAK61D_GB_11C_PCB01_GPRS_MT6261_S00.T2014_VERSION.BIN
the file not be encrypted
Read OK.
Total time: 0 mins 8 s
>>File Save to: C:\Users\Master Telecom\Desktop\winmax Bd77 MTK6261 Flash File\KEYTAK61D_GB_11C_PCB01_GPRS_MT6261_S00.T2014_VERSION.BIN

Download Link – Bin File

 Card found : S/N : B63E1AF3 , v0134
Chinese Miracle II [MTK module] v 1.58

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey ( ‘*’ )

Wait for phone…
Phone found! [ 7 ]
Sync…
Sync Ok, read regs…
Inital regs read done
Boot Info :
BB_CPU_ID : 6261
BB_CPU_HW : CB01
BB_CPU_SW : 0001
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6261_S0000
BB_CPU_SN : 52287E3233F0513C96F3D71D9ECD7221
BROM Protocol Version : 05
Setting…
Setting done , result code 0x000E
BROM stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target …
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8E
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x0113 , [Winbond] SF_W25Q32JV
[0] : FLASH_DIE : 00EF 0070 0016 0000
[0] : FLASH_LEN : 0x00400000
SDS_INFO : 0x003FE000 , 0x00002000
INT_RAM : 0x0000D000
EXT_RAM : 0x00400000
Reading Flash Content now …

Read Flash now
Read Ok , 4194304 bytes read
Check and collect compile info
File_Info : KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00.T2014_VERSION.bin
FileVersion : T2014_VERSION

[ScatCFG] : MT6261 / T2014_VERSION / NOR , SF
Firmware saved to : C:\InfinityBox\CM2MTK\Read_out\KEYTAK61D_GB_11C_PCB01_gprs_MT6261_S00\

Done!
Elapsed: 00:00:15
Reconnect Power/Cable!

 

Download Link – Scatter File